EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a extremely productive photo voltaic controller created for off-grid photo voltaic units. According to multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Vital Features on the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technological innovation for remarkable photo voltaic energy harvesting. Key features incorporate:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Advanced MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for enhanced battery lifetime.
Liquid crystal display Display screen with real-time data checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Phase-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are included: Tracer AN unit, temperature sensor, interaction cables, and person handbook.
Verify the product selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable security protocols and ensure the procedure is powered off right before connecting parts.
Stage 1: Join the battery terminals on the charge controller (positive to favourable, detrimental to adverse).
Phase 2: Join the solar panel array towards the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power about the controller by connecting the battery very first.
Use the Click Here Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time checking using the MT50 distant meter.
Knowledge could be logged by using the RS485 conversation port utilizing application like Photo voltaic Station Computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Problem one: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Confirm the solar array’s voltage ranking.
Modify process parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT settings inside the menu.
Benefits of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification technological innovation makes certain:
Better Effectiveness: Diminished Strength losses in the course of conversion.
Increased Dependability: Secure general performance beneath variable hundreds.
Lengthier Battery Lifestyle: Constant and correct charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification know-how is really an Remarkable option for optimizing solar energy generation and increasing battery existence. By pursuing the above mentioned setup guide, buyers can ensure optimum efficiency and process longevity.