EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller can be a highly efficient solar controller suitable for off-grid photo voltaic units. Depending on multiphase synchronous rectification technology, it makes sure optimized energy conversion and technique security for a variety of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Vitality harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery life.
Liquid crystal display Display screen with actual-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Complete Electronic Protections versus overcharging, over-discharging, brief circuits, and reverse polarity.
Move-by-Step Guideline to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Assure all parts are incorporated: Tracer AN device, temperature sensor, interaction cables, and person guide.
Verify the model number and voltage scores match your solar panel and battery technical specs.
two. Mounting the Charge Controller
Select a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the supplied mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Demand Controller
Warning: Normally observe suitable security protocols and ensure the process is powered off just before connecting elements.
Move 1: Join the battery terminals into the cost controller (beneficial to constructive, negative to damaging).
Step two: Hook up the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections visit here for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery 1st.
Make use of the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Handle.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using software package including Photo voltaic Station Personal computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Problem one: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses in the course of conversion.
Improved Reliability: Steady overall performance less than variable hundreds.
Lengthier Battery Lifestyle: Regular and correct charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy generation and lengthening battery life. By adhering to the above mentioned setup guide, consumers can be certain optimum effectiveness and technique longevity.